Skip to content
Use Code 5RAM for 5% off! | ⭐⭐⭐⭐⭐ 4.8 | 10,000+ Reviews
⭐⭐⭐⭐⭐ 4.8 | 10,000+ Reviews
hide channels

How to Hide Channels on Rollease Automate Paradigm Remote

Hiding Channels on the Automate Remote

Hiding channels on your Rollease Automate Paradigm remote is beneficial if you are not using the channels. Hiding them makes it easier for you to go back and forth between the channels you are using. To learn how to hide the channels, read the steps below.

  1. Press the "Channel" and "Stop" button simultaneously. 
  2. Then tap "Up" or "Down" while holding the "Channel" button. This will allow you to select up to which channels you want to use.
  3. To check if you did this correctly, tap "Channel" and go through the channels. You should only see the number of channels you previously selected. 
  4. If you would like to reset back to the full 15 channels, press "Channel" and "Stop" at the same time. While holding "Channel", press "Stop".

hide channels

To purchase a remote visit our Rollease Automate section here.

Have a question on waking or pairing Automate Shades? Email us

Shop for Rollease Parts at

Previous article How to Set a Favorite Position on Rollease Shades
Next article How to Lock Rollease Automate Paradigm Remote

Leave a comment

Comments must be approved before appearing

* Required fields