Skip to content
Rollease parts, motors, and hardware available for sale! *Shipping times may be delayed due to backorders*
Rollease parts, motors, and hardware available for sale! *Shipping times may be delayed due to backorders*
How to Add and Remove Pre-Tension - Rollease Easy Spring Wand

How to Add and Remove Pre-Tension - Rollease Easy Spring Wand

Adding and Remove Pre-Tension for Easy Spring Wand

This short simple guide will cover on how to add or remove pre-tension to your springs. To complete this, you will need to use 5mm socket head.easy spring wand

  1.  To add pre-tension, hold the control head and use the socket head and turn in a counterclockwise motion.
  2. After adding tension, lock the spring by turning the control head in the opposite direction.
  3. To remove pre-tension, hold the control head and unlock by 1/4 turn in the opposite direction. Use the socket head and turn in a clockwise motion. 
  4. Lock the spring by turning control head back the other way.

For any questions or for more information, email info@rolleaseacmedamtors.com. To purchase Rollease parts, visit RolleaseAcmedaMotors.com

 

Previous article Rollease Automate Pulse 2 - Apple HomeKit Instructions and FAQs
Next article How to Set a Favorite Position on Rollease Shades

Leave a comment

Comments must be approved before appearing

* Required fields